Effective Ways to Fix ViewSonic Monitor No Signal Issues

ViewSonic monitors are budget-friendly display units used by both professionals and regular users. These are ideal for home usage and can get day-to-day tasks done flawlessly. The monitor can support multiple types of GPUs and, all in all, is a good package at a lower price point. But recently, many users have shared that the ViewSonic monitor has no signal issue and has hijacked their device. 

The No signal issue usually appears when the device connection is weak or there are compatibility issues with the GPU. Thankfully, both these issues are resolvable. In this post, let us look at practical ways to fix the ViewSonic monitor’s no-signal issue. 

Fixes to Help You Resolve ViewSonic Monitor No Signal Issues

As shared above, connection or compatibility issues are the core reasons behind the no signal prompt on your ViewSonic Monitor. Let’s take a look at potential issues along with their fixes. 

1. Verify Input Source

The first issue that may be causing the no-signal error is the source that you are using. Sometimes the input source differs from what your monitor is currently set to. A ViewSonic monitor offers 4 types of input sources – 

• HDMI
• DisplayPort (DP)
• DVI
• VGA
• Type C
• Mini Display

All these use a different cable, and your monitor may be set to a different input mode, which has no source connected to it. In that case, you will get the no signal error. You have an internal button on the monitor itself that allows you to check the input mode. Press the Menu and +/- buttons to scroll through the options. 

Not to mention, there can be compatibility issues with the current graphics card that you are using. In both cases, you must verify the input source. 

2. Check Connected Cables

If the connected cables are not working properly, a ‘No signal’ error is bound to occur. There are two things you need to do – 

• Try using a new pair of cables with your current monitor
• Try using your current pair of cables with a different monitor.

When you finish these two things, you can identify if the issue lies with the monitor or the cable you use.

Sometimes, the issues also lie in the connection, so ensure that the port is not loose or the cable is not tempered. The power cable of your ViewSonic monitor can also be why it is not working perfectly. Hence, you should see if the supply is properly connected and is not damaged. 

Must Read: Fixed – No DP Signal From Your Device Monitor (Dell)

3. Drain Any Power from Your ViewSonic Monitor

Sometimes, the microprocessors used in the monitor get stuck with the error once it has experienced it. In this case, the best way to eliminate the no-signal issue is to end the power cycle of the monitor completely. Follow the given instructions – 

• Turn off the power supply of the device.
• Remove any connections with the power supply or CPU.
• Leave the monitor without any connection for 10-15 minutes.
• Before reconnecting the power supply, press and hold the power button for 10 seconds.
• Connect the monitor back to your device, and it should work fine.

It is recommended that you perform this practice now and then to ensure the proper operation of the ViewSonic monitors. 

4. Update GPU Drivers

In case the connection issues were not causing the no signal error, it must be the compatibility of the GPU with the monitor. The best practice is to keep your GPU drivers updated to be compatible with the hardware you use. However, since updating drivers is a lengthy process, many users do not even try. 

Several users do not even know how to update drivers on Windows. In that case, the best and most instant solution is to use Advanced Driver Updater. It is a tool that allows you to automate the process of driver updates and helps you resolve the no-signal issues with the ViewSonic monitor. 

Here’s how the tool works – 

• Download the tool from the link below
  

• Click on Start Scan Now
• Check for Outdated Drivers
• Click on Update All
  
  
  
• Wait while the Drivers are updated

It’s that simple! Download today to see how effectively it works. 

5. Reset your ViewSonic Monitor

Lastly, you do have the option to reset the monitor to its default settings. This can help you bring the monitor back to its factory settings, removing any sort of discrepancy if it has occurred. Here’s how to reset the monitor – 

• Press the Menu Button and scroll down to find the Reset option.
• Alternatively, you can simultaneously press and hold the power button along with the +/- buttons until the device goes into reset mode.

Both ways will help you resolve any misconfigurations in the monitor. You can easily get rid of no signal error on the device with a quick reset. 

These 5 methods have been tried and tested by several users, including our experts. Hope they help you too. That’ll be all for this post. Thanks for reading. Catch you in the next one!

Recommended :

Computer Turns On But No Display On Monitor – 5 Effective Ways to Fix
Troubleshooting Guide To Fix Display or Monitor Issue with Lenovo PC
Acer Monitor Not Working: Possible Fixes